pullman Ermator I2000ESD, Operating Instructions Manual

Page: 12 / 21

11
Problem solving
I2000ESD is designed and manufactured for a severe environment and tasks, but the user must note
that the machine components must be protected from knocks and blows. Filter, seals, attachments, and
connections are carefully adapted and selected with regard to the operator’s work environment.
Therefore, the operator and service personnel must treat the machine with care if it is to work correctly
for many years.
Problem Cause Procedure
Motor doesn’t start No power Connect the machine
Defective cable Change
Defective switch Change
Motor stops immediately on Wrong fuse Connect to correct fuse
starting
Motor runs but there is Hose not connected Connect hose
No suction Hose blocked Clean hose
Motor runs but suction Hole in the hose Change hose
is poor Filter blocked Change filter
Sealing defective Change current seal
Dust blows from motor Filter defective or loose Adjust or change
Abnormal noise Order service