pullman Ermator I2000ESD, Operating Instructions Manual

Page: 10 / 21

9
Proper personel protective equipment must be used.
Shut off the machine and pull the plug out of the socket.
1. Remove the plug from the electric outlet.
2. Lift off the filterholder with the filter.
3. Loosen the fingernut and remove the filter cap and filter.
4. Check the sealing on the filterholder.
5. Assemble the new filter.
6. Same procedure for dustfilters.
7.
Clean all other parts.
Service
•
When cleaning and servicing the machine, You must switch off the machine and pull out the plug
from the outlet.
•
Avoid cleaning with high pressure cleaner. If necessary do not point at the openings on the
machine, especially the opening for the cooling air.
•
Before moving the machine from the working area, the machine must be cleaned. Furthermore
must the inlet be locked with the expanding plug attached.
•
All other equipment must be regarded contaminated and be treated thereafter.
•
If possible use a special suitable room.
•
Proper personel protective equipment must be used.
•
All parts after service, which are contaminated, must be taken care of in a proper way in plastic
bags according to all regulations.
•
If the vacuum cleaner has to be used for other purposes, it is extremely important that the vaccum
cleaner will be cleaned, to avoid spreading of hazardous dust.