Pudu FlashBot FBBDR1, User Manual

Page: 18 / 38

PUDU ROBOTICS PUDU ROBOTICS
14
This wheeled robot can only be used indoors on flat surfaces such as wood floors, ceramic tiles, and
thin carpets. Using in outdoor space (for example, open balcony), on the rugged ground (for example,
stairs), in a temperature above 40° C or below 0° C, or on surfaces covered with fluid or gooey stuff is
not allowed.
Do not pull or push the robot while it is working. If you need to push or move the robot, press the
emergency stop switch to stop it from moving first.
Do not block the robot components or overfill the tray. Otherwise, the robot may fail to move properly
or get lost.
Do not pat the device or press or tap hard on the screen, or damages may be caused.
Do not overload the robot. Do not put any flammable solid, gas, or liquid on the tray. Do not deliver
goods with high temperatures or soups to avoid damaging the robot or injuring the passer-by.
Do not maintain the robot when the power is on.
Cables on the ground should be put away in advance to prevent the robot from dragging them.
All sharp-edge objects (such as decoration wastes, glasses, nails) should be removed from the ground
to prevent damage to the robot chassis.
A maximum speed of 0.8m/s is recommended for safe operation. No playing is allowed in front of the
robot to avoid unnecessary harm. Although the robot features automatic obstacle avoidance, there is
a blind spot. Blocking the robot moving at a high speed may cause accidents.
Do not deliver unpackaged drinks or beverages. Do not deliver liquids at high temperatures.
The aisle should be at least 80cm wide for the robot to pass. In the case of a long aisle, a width of 1m
is recommended for smooth moving. A width of 2m allows two robots to move in two directions (The
required width depends on the technician's evaluation of the scene).
Safety Instructions
1.1 Unified Instructions
最小通行宽度：
80cm
对向会车行驶：
2m