Pubert IROKO 55P, Operating Instructions Manual

Page: 29 / 48

13 - EN
1 Motor off, spark plug cable disconnected, fuel supply shut
VIII / TRANSPORT
2
The shredder must only be transported in a trailer.
Use appropriate loading ramps.
Tie the shredder down correctly using straps.
To unload, follow these instructions in reverse.
Do not lift the shredder
Tie-down points
for trailer transport
IX / TO SHARPEN OR CHANGE KNIVES
(to be done by your approved repairer) (To wear gloves)
- Disconnect the spark plug cable
- Open the obstruction clearance hatch (see VI –e)
- Remove the feeding chute (see VII)
- Using a 5 mm Allen key and a 13 mm open ended spanner, unscrew the 4 screws
(1) and nuts (2) holding the 2 blades in place (3).
- To sharpen (see diagram 1) or always replace the 2 knives at the same time. To
always replace screws and nuts during replacement or sharpening (see dia-
gram 1) of knives. (Caution only knives as well as fastening screws specifi-
cally designed for your crusher must be used.)
- To reassemble knives by taking care not to forget to restore the balance weight (4)
(Torque 24 N.M) To correctly align and stick the 2 knives one against the other.
2
4
3
1
36 MINI
C
45°
30°
Diagram 1
To respect the wedge angles
If side mini C less than
!
mm, it is
compulsory to replace the knives.
Risk of your machine deteriorating.
(Rotor Imbalance)
36 36 36
MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN MIN
I I I I I I I I I I I I I I I I I I I I I I I I I I I I
C C C C C C C C C
45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°
30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30° 30°
Remove blades
Reassemble blades (torque 24 N.m)