37
1.5
Network Settings
Click
“
Network
”
. The network parameters may now be set in the right side area.
1)
LAN Settings
IP settings for the device can be set here. The Default the IP address of the camera is 192.168.100.88. The MAC
address can be modified but should be left as set by the factory. Please note that after changing the IP settings for
the camera, you may not be able to reconnect until your PC is set for and connected to the same subnet or visible via
proper network routing.
2)
Port Settings
While the IP address identifies the device, the camera uses multiple ports.
HTTP Port
: This is the port for the web application (the default http port: 80)
Summary of Contents for VL-ZCAM
Page 1: ...Rev 1 0 10 15 PTZ Optics VL ZCAM User Manual V1 0 English...
Page 32: ...31...
Page 40: ...39...
