26
IP camera viewing and control via IP
1
Setting up the camera’s IP address:
1.1
Connect the Camera to the network (or PC). Turn on the camera power. The current IP address can be searched via the
“
Up
grade”
software (software upgrading tool, named
“
upgrade_En.exe
” or “upgrade.exe”
that can easily be downloaded from
the
http://www.ptzoptics.com/downloads/
web site). Run
“
upgrade.exe
”. C
lick the [Search] tab.
Click the “Search” Button.
The software will show the camera's IP address, subnet mask, network gateway and the camera
’s
MAC address, as shown
below:
If you have multiple cameras on the network, you can identify the camera you are working with by disconnecting and
reconnecting the camera to see which MAC address belongs to that camera.
To set the IP address for the camera to work within your network environment, click the [config] tab or right click the listing in
the [search] tab and select “config”.
Summary of Contents for VL-ZCAM
Page 1: ...Rev 1 0 10 15 PTZ Optics VL ZCAM User Manual V1 0 English...
Page 32: ...31...
Page 40: ...39...
