DIAMENTOR E2
Cleaning, Preventive Maintenance and Disposal
24
D651.131.00/05 en
Safety inspections
Only regularly inspected product s are fail-safe. To
preserve the functional security and operational
safety, the safety inspections are to be executed at
regular intervals according to national regulations.
These inspections must only be performed by inde-
pendent persons with adequate training and experi-
ence.
It is recommended to execute the safety inspections
annually or every 2 years.
Technical Inspection of the Measuring Systemm
The product must be inspected at regular intervals
according to national regulations. It is recom-
mended to perform the technical inspections of the
measuring system annually or every 2 years at
PTW-Freiburg or a qualified calibration laboratory.
Inspections must also be performed after repairs or
after each influence which may have changed the
behavior of the product.
Calibration
The exact calibration factor and supplementary data
are included in the calibration certificate.
We recommend to have the DIAMENTOR E2 cali-
brated annually or every 2 years at PTW-Freiburg
or by specially trained staff on site.
9.3 Disposal of the Product
The typical lifetime of the DIAMENTOR E2 is about
10 years.
At the end of the product life ears the
DIAMENTOR E2 components must be disposed of
in compliance with the applicable waste control
regulations. The different materials must be sepa-
rated and recycled as appropriate.
DIAMENTOR E2 does not contain hazardous mate-
rials.
The electronic components must be recycled ac-
cording to local regulations.
The cost for an eventual return at the end of the
product life time is to be borne by the customer.
