Scaler Wall Plate HDBaseT Transmitter
PTN Electronics Limited 5 www.PTN-electronics.com
3.3 Connection Procedure
Step1.
Connect HDMI source device (e.g. Blue-ray DVD) to HDMI input ports of
TPHD405PT-WPI with HDMI cable. Connect a VGA source device (e.g. PC) to
the VGA input port of TPHD405PT-WPI with VGA cable.
Step2.
Connect a TPHD402PR to the HDBT port on the rear panel with twisted pair.
Step3.
Connect a HDMI display to the HDMI OUT port of TPHD402PR.
Step4.
Connect a control terminal to the RS232 port on the front panel of TPHD402PR.
Step5.
Both TPHD405PT-WPI and TPHD402PR have IR IN and OUT. When one model
is used for IR signal receiver, the IR signal must be sent out by the other model.
For example
: When “IR IN” of TPHD405PT-WPI connects with an IR receiver,
the IR transmitter must connect to IR OUT of TPHD402PR.
The IR signal can be transmitted bi-directionally between TPHD405PT-WPI
and TPHD402PR.
Step6.
Connect control device (e.g. PC) to RS232 port of TPHD405PT-WPI or
TPHD402PR (bi-directional RS232 control, either is available).
Step7.
Connect DC 24V power adaptor to the power port of TPHD402PR,
TPHD405PT-WPI is able to get power from TPHD402PR with PoC solution.
IR Remote
Blue-ray
TP
HD
40
2P
R
TPH
D40
5PT
-W
PI
PC
Projector
Rs232
PC
