background image

Scaler Wall Plate HDBaseT Transmitter                  

       

 

PTN Electronics Limited                    15            www.PTN-electronics.com 

8. After-sales Service 

If there appear some problems when running TPHD405PT-WPI, please check and deal 
with the problems reference to this user manual. Any transport costs are borne by the 
users during the warranty. 

1)  Product Limited Warranty: 

PTN warrants that its products will be free from defects 

in materials and workmanship for 

three years, 

which starts from the first day you 

buy this product (The purchase invoice shall prevail). 
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence 
that the unit is within the Warranty period must be presented to obtain warranty 
service. 

2)  What the warranty does not cover:

 

 Warranty expiration. 

 Factory applied serial number has been altered or removed from the product. 

 Damage, deterioration or malfunction caused by: 

  Normal wear and tear 

  Use of supplies or parts not meeting our specifications 

  No certificate or invoice as the proof of warranty. 

  The product model showed on the warranty card does not match with the 

model of the product for repairing or had been altered. 

  Damage caused by force majeure. 

  Servicing not authorized by PTN 

  Any other causes which does not relate to a product defect 

 Delivery, installation or labor charges for installation or setup of the product 

3)  Technical Support: 

Email to our after-sales department or make a call, please 

inform us the following information about your cases. 

 Product version and name. 

 Detailed failure situations. 

 The formation of the cases. 

 

Remarks

: For any questions or problems, please try to get help from your local 

distributor, or email PTN at: 

[email protected]

.

Summary of Contents for TPHD405PT-WPI





















Reviews: