PTN FMX12, User Manual

Page: 25 / 44

Single Plug-in Card Matrix Switcher
PTN Electronics Limited 20 www.PTN-Electronics.com
%9978.
Inquire output resolution configuration
mode (manual/ auto EDID)
Channel xx is
auto/manual signal
format
%9981.
Inquire input/output type of current
inserted cards
Note: If there is no card inserted in a
slot, it will show
“Nc” instead of In/ Ou.
Port 01 02 03 04
Mode In In Ou In
Port 05 06 07 08
Mode Ou Ou Ou Ou
Port 09 10 11 12
Mode Ou Ou Nc Nc
Channel status has
changed
Commands for Signal Cards
FMX-OTP/VG/ DV/ HD
USER/O/[x]:0804%;
Set the resolution of output [x] to 720P
60Hz Resolution Out08
1280x720P
USER/O/[x]:0810%;
Set the resolution of output [x] to
1080I 30Hz Resolution Out08
1920x1080I
USER/O/[x]:0813%;
Set the resolution of output [x] to
1080P 60Hz Resolution Out08
1920x1080P
USER/O/[x]:0822%;
Set the resolution of output [x] to
800X600 60Hz Resolution Out08
800x600
USER/O/[x]:0824%;
Set the resolution of output [x] to
1024x768 60Hz Resolution Out08
1024x768
USER/O/[x]:0826%;
Set the resolution of output [x] to
1280X1024 60Hz Resolution Out08
1280x1024
USER/O/[x]:0837%;
Set the resolution of output [x] to
1920X1200 60Hz Resolution Out08
1920x1200
FMX-OVG
USER/O/[x]:0900%;
Set the resolution of CVBS output [x]
to 480i Resolution Out 01
720x480 I
USER/O/[x]:0901%;
Set the resolution of CVBS output [x]
to 576i Resolution Out 02
720x576 I
USER/O/[x]:0201%;
Set the signal format of VGA output [x]
to YPBPR
0201%
USER/O/[x]:0202%;
Set the signal format of VGA output [x]
to VGA
0202%
USER/O/[x]:0203%;
Set the signal format of VGA output [x]
to CVBS
0203%
USER/O/[x]:0110%;
Enable analog audio output for output
[x] Channel 11 out audio
command is:0110%