PTN FMX12, User Manual

Page: 23 / 44

Single Plug-in Card Matrix Switcher
PTN Electronics Limited 18 www.PTN-Electronics.com
/+[Y]/[X]:******.
Set communication between PC and
HDBaseT receiver.
①
Y is for RS232 port (connect with
RS232 port of HDBaseT receiver)
a. Y = 1~12, send this command to
the corresponding HDBaseT
receiver to control far-end device.
b. Y = A~L, send this command to
the corresponding HDBaseT
receiver when FMX12 is powered
on
c. Y = M~X, send this command to
the corresponding HDBaseT
receiver when FMX12 is powered
off
②
X is for baud rate, its value ranges
from 1 to 7 (1--2400, 2--4800,
3--9600, 4--19200, 5--38400,
6
—57600, 7--115200)
③
***** is for data (max 48 Byte)
601%
Volume of MIC : 60
(****** and feedback
from HDBT receiver)
%0911. Reset factory default Factory Default
Inquiry Command
Status[x].
Inquire the respective input for output
[x]
AV:01-> 02
Status.
Inquire respective inputs for all
outputs
AV:01->02
AV:03->06
… …
CheckInKatype.
Get the input signal card type
*-- no available input signal card/
output card, 1--VGA, 2--DVI, 4--BT,
5--SDI, 6--HDMI
Channel
IN:*11*4**11*4*.
CheckOutKatype.
Get the output signal card type
*-- no available output signal card/
input card, 1--VGA, 2--DVI, 4--BT,
6--HDMI
Channel
OUT:***4*62**1**.