Single Plug-in Card Matrix Switcher
PTN Electronics Limited 24 www.PTN-Electronics.com
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the FMX12 to Ethernet port of PC with straight-thru
CAT5e/6.
Step2.
Set the PC’s network segment to the same as the FMX12’s.
Step3.
Set the FMX12
’s network segment to the same as the router.
Step4.
Set
the PC’s network segment to the original ones.
Step5.
Connect the FMX12 and PC(s) to the router. PC(s) within the LAN is able to
control the FMX12 asynchronously.
4.4.2 Control via TCP/IP communication software
(Exampled by TCPUDP software)
1)
Connect a computer and FMX12 to the same network. Open the TCPUDP software
(or any other TCP/IP communication software) and create a connection, enter the IP
address and port of FMX12 (default IP: 192.168.0.178, port:4001):
Router
Internet
PC
CAT5e
TCP/IP
Summary of Contents for FMX12
Page 43: ......