HL Series – Instructions manual
12
SUBMENU
DENSITY
(OPTIONAL)
ONLY FOR HL Series 20
This menu is visible only if the conversion of the weight value in volume is activated.
Activating this function in the work menu it will be visualized both the weight and the
volume of the liquid contained in the vessel under which there are the load cells. The
volume value, in litres, is indirectly calculated from the weight value, through a
conversion coefficient that the user will have to properly set.
Into the DENSITY submenu it is possible to set the following parameters:
DENSITY
Coefficient for the conversion of the weight value detected by the sensors into a
volume. This coefficient can be expressed in Kg/l or l/Kg by virtue of the parameter
selected in the DENSITY MEASURE menu.
PRINCIPAL SIZE
The principal size visualized on the English flag display; it is possible to select the
weight or the volume calculated. Depending on what it is set on this menu, the
working menu will have a different visualization.
DENSITY MEASUREMENT
Unit of measurement for the value of liquid density. It is possible to select Kg/l or l/Kg.
Moving from one unit of measurement to another, the weighing indicator will
automatically calculate the new coefficient.
Es. 2,500 Kg/l = 0,4 l/Kg
NOTE: The weighing indicator permits using a density value with 3 decimals, so by
continuously changing the DENSITY MEASUREMENT parameter, the DENSITY
parameter value may drift. This may happen as an effect of the rounding
automatically effectuated by the weighing indicator during the calculations.
menu
menu
menu
menu
COMPONENT PASSING
ONLY FOR HL Series 30-50
Press
and
o selects the components manual or automatic passage in the
load or unload phase. The passage automatic/ manual works for all loads and
unloads.
menu
menu
menu
menu
menu
menu
menu
menu
COMPONENTS
ONLY FOR HL Series 30-50
This menu allows visualize, add, modify and delete the components that could be
used in the load operations of the single recipe.
Press
and
to visualize the components list.
Press
to go on the component modify. Press
to exit.
menu
menu
menu
menu