HL Series – Instructions manual
28
CODE 27: N. WEIGHT CALIBR.
In this code it is possible to choose the calibration number from the chart at the end
of this manual.
The calibration number that should be used depends on the number and kind of load
cells installed on the system.
By modifying the N. WEIGHT CALIBR., the model (third line), number of load cells
(right) and the capacity (second line) are updated.
cod:27
cod:27
cod:27
cod:27
CODE 45: WEIGHT SPEED
In this code it is possible to set out the speed of weight visualization, which is the time
passing from the moment, when the weight is put on the load cells, to the moment,
when it is shown on the display.
It is possible to set out the speed from 1 (very slow) to 20 (very quick).
cod:45
cod:45
cod:45
cod:45
CODE 50: ALARM PERCENTAGE
(ONLY FOR HL Series 25-30-50)
In this code it is possible to set out the parameters of the acoustic alarm. There are
two different parameters
ALARM. PERCENT: the percentage of started alarms, that is the percentage
of carried out loading and unloading, starting from when the alarm begins
ringing out intermittently (from 0% to 30%)
ALARM ALWAYS ON: is the seconds during which the alarm will continue
ringing out after the end of the loading and unloading operation, before going
on to the next component. (0 a 60 sec)
cod:50
cod:50
cod:50
cod:50
CODE 54: BUZZER
In this code it is possible to activate (ON) or deactivate (OFF) the sounds emitted
from the weighing indicator:
KEYS SOUND: sound emitted by pressing the keys
ALARM ON BUZZER: sounds associated to events of the external alarm
LOCKED SOUND: With this parameter it is possible to exclude the sounds of
the internal BUZZER, of the ALARM or of both, when a programmed loading
or unloading are in execution.
cod:54
cod:54
cod:54
cod:54
CODE 55: OUTPUT 4-20mA
(OPTIONAL)
In this code it is possible to set the min. and max. weight value of the 4-20mA output.
cod:55
cod:55
cod:55
cod:55
