24
PTEK
April 2016
Press the OPERATE key on the front of the PS Series. Check that the fans are
running and that the indications are as below:
Figure 3-2.
PS Series Front Panel
Switch the exciter to OPERATE
After the startup sequence has completed and the exciter is generating power the
PS Series will also produce power.
Typically the power is set at the factory to a mid value (i.e. 1500W for the 3000W
PS Series). This should now be indicated on the LCD display similar to this:
Figure 3-3a.
LCD Display Power
Pressing the function key will change the display to read Voltage and Current.
Figure 3-3b.
LCD Display Current & Voltage
