16
PTEK
April 2016
Chapter
2
Installation
2.1
Installation Procedures
Caution: Use industry-standard ESD grounding techniques when handling
all components. Wear an antistatic wrist strap and use an ESD-protected
mat. Store ESD-sensitive components in antistatic bags before placing
them on any surface. Handle all IC cards by the front panel or edges only.
There are no operator serviceable parts inside the PS Series; therefore,
replacement, inspection, or adjustment of internal components within the
ES Series requires service by an authorized PTEK technician only. DO
NOT REMOVE THE TOP PROTECTIVE COVER OF THE PS Series
CHASSIS (see following warning).
Warning: Removal of the top protective cover of the PS Series by anyone
other than an authorized PTEK technician will void the product warranty.
Installation
Section
