36
•
EN
4
Setting Menu Receiver
4.1 Overview
iSync
Indication
Function
Group
Adjusts the group (A to J or A to E)
Channel
Adjusts the transmission channel (1 to 10 or 1 to 9)
Freq
Adjusts the transmission frequency manually (25 kHz steps)
Scan
Automatic frequency setup
Sync
Synchronizes receiver and microphone
Lock
Enables/disables the lock mode
TX Gain
Adjusts the transmitter’s gain level (+4 dB to -32 dB)
RX Gain
Adjusts the audio output level (+4 dB to -32 dB)
Low Cut
Enables/disables the high-pass filter (-3 dB at 180 Hz)
Squelch
Adjusts the squelch threshold (1 to 10 dB)
Pilot Tone
Enables/disables pilot tone evaluation
Color
Adjusts a user color (8 colors available)
Name
Adjusts a user name (8 characters available)
ANT DC
Enables/disables the DC supply provided by the antenna inputs
To enter the setting menu of the respective receiving channel, briefly press the corresponding channel
button (RX 1 or RX 2) and then control knob.
Turn the knob to browse the menu items and press the knob to select the desired function. Turn the
knob to make your settings and press the knob to confirm them. Any settings changed will be instantly
accepted by the unit.
All settings marked with a check mark are transferred to the transmitter via the iSync wireless
connection. This allows you to configure all important settings for the transmitter from the receiver.
Use the
button to jump to the next higher menu level and exit the setting mode. The standard display
will be indicated. If no button has been pressed for a few seconds, the setting mode will be exited
automatically.
