38
•
EN
4.4 Adjusting radio frequency manually
Here you can freely set the radio frequency in 25 kHz steps. Please note, however, that the frequencies may
not be interference-free.
Select the desired receiving channel with the channel button RX1 or RX2.
Press the control knob to enter the menu.
Select menu item
Freq
. The current setting can now be changed.
Turn the control knob and select a frequency. Then press the control knob to confirm
the setting.
Press this button to return to the standard display.
4.5 Automatic frequency setup
With the automatic scan feature you can set an interference-free transmission frequency. Leave
microphones that have already been set to a radio frequency switched on before performing the scan.
Select the desired receiving channel with the channel button RX1 or RX2.
Press the control knob to enter the menu.
Turn the control knob and navigate to menu item
Scan
.
Press the control knob to start scanning.
When the scan is complete, the display shows the frequency found graphically as a
vertical line. Then press the controller to select the frequency.
Press this button to return to the standard display.
A
Group
BEAVELEO
Menu
Scan
Sync
Group
Channel
Menu
Channel
Freq
Scan
Sync
Group
Freq
664.950
MHz
Frequency
Menu
Scan
Sync
Group
Channel
Freq
Frequency
664.950
MHz
Menu
Scan
Sync
Group
Channel
Freq
Frequency
BENUTZER
646.950
MHz
RX3
RX4
USER
RX1
RX2
RX3
RX4
USER
RX1
RX2
CH1/2
90dB
BENUTZER
RX01
Freq
Sync
Group
Channel
A
Group
RX01
Channel
Freq
Scan
Sync
Group
Scan
Scan
Frequency
BENUTZER
90dB
606.000 MHz
Scan display
Detected free frequency
RX3
RX4
BENUTZER
RX1
RX2
RX3
RX4
BENUTZER
RX1
RX2
CH1/2
