33
Battery Replacement
1. Remove the single screw, located in the middle of the back of the
CableMaster, with a #1 Philips head screwdriver.
2. Take out the old battery and disconnect the battery cable.
3. Replace the old battery with an ANSI 1604A, 9 volt alkaline battery
(Energizer 522, Duracell MN1604). Reattach the cable to the new
battery and place the new battery into the battery compartment.
4. Return the battery door to the unit and turn the screw into place to
secure the battery door.
Do not over tighten the battery door. Doing so can damage the
test unit.
Cleaning
Use a damp, clean cloth to clean the tester.
Disconnect all cables from the CableMaster prior to cleaning.
Failing to do so can damage the unit and result in personal
injury.
Do not use abrasive, harsh cleaners, or solvents to clean the
CableMaster.
Storage
When the CableMaster is not in use, store it in a dry, protective case.
The battery should be removed if the tester is stored for a long period
of time.
Do not expose the CableMaster to high temperatures or humidity. When
stored in temperatures exceeding the limits listed in the
Specifications
section, allow the CableMaster to return to the normal, recommended
operating conditions prior to use.
MAINTENANCE
!
!
