![Psiber Data Systems PingerPro 70 User Manual Download Page 6](http://html1.mh-extra.com/html/psiber-data-systems/pingerpro-70/pingerpro-70_user-manual_1622854006.webp)
6
Psiber Data Systems Revision 2.01
PingerPro User Guide
Getting Started
Turn on the PingerPro by pressing the power button until the screen lights up, and then release the button.
The unit displays the welcome screen for approximately 10 seconds and then the Home Screen
automatically displays.
Copper Home Screen
Fiber Home Screen
The
Home Screen
has Auto Test, Ping, Cable Test, Setup and Help Buttons.
•
Auto Test
tests the network with configured parameters selected from the Setup screen.
•
Ping
is a quick but powerful test that, while in factory default setting, sends a Ping from the tester
to the Gateway from any part of the network. The Ping test can be quickly changed to user
configured profiles to Ping other devices.
•
The
Cable Test
tests the physical copper portion of the network by measuring the length of the
cable to a short or open, performing a wiremap analysis for incorrect wire connection, sending a
tone for traceability or sending a signal to blink the switch port specific LED.
•
The
Fiber Test
displays the power detected from the device attached to the fiber SFP port.
•
Setup
allows the user to customize settings for the Auto Test and the Ping test to test specific
network parameters.
•
The
Help
button displays step-by-step instructions on how to use the PingerPro and displays the
quick start guide.