Explanation of Individual Menu Items
4-23
4.3
Menu Mode BASIC SETTINGS
4.3.1
CONFIG MENU
In the Configuration Menu general settings for the printer´s operation are
defined.
$
POWER SAVE
The time until the power save mode is entered can be set to 15, 30, 45, 60
MIN or OFF; factory default is 15 MIN.
$
OFF
The printer doesn´t switch into the POWER SAVE mode.
In power save mode the printer switches off the fuser lamps, the fans, and
motors. Power dissipation in POWER SAVE mode is less than 45 watt. The
messsage 00 POWER SAVE is displayed. A new print job causes the
POWER SAVE mode to be left.
If there are no new messages to be displayed within the next 15 minutes the
panel light is switched off as well. This function is independent of the
choosen POWER SAVE time.
$
KEEP TEMP. HIGH (Keep Fuser Temperature High)
The fuser temperature will not be lowered if a break between print jobs is
shorter than the selected time period; factory default is 1.0 minutes.
Possible values are:
ALWAYS, 0.5 up to 60 minutes in steps of 0.5 minutes.
Note:
If paper is still in the fuser and a time period
3.5 minutes is selected
the fuser temperature will be lowered after three minutes for safety
reasons. This happens also in case ALWAYS has been selected.