4-2
$
SELECT FOLD LOWER
$$
SELECT FOLD UPPER
The standard setting for both tractors is POSITIVE fold. In this case check
that the fold behind the first page is a positive one (fold points outwards). If
not tear off one page and insert the paper again beginning with a positive
fold.
If it is not possible to lose a page use this parameter to change the standard
setting to NEGATIVE.
Note:
This fold setting must occur every time when paper is newly inserted.
$$
CHANGE PROFILE
To change one out of 50 possible set up parameter blocks called Profiles,
determining the application specific printer set up.
Note:
Each profile contains all print job relevant set up parameters
specifying the features and functions grouped into different
submenus like PAPER MENU, PCL MENU, and GENERAL MENU.
$$
BASIC SETTINGS
In this menu mode it is possible to configure all the basic operation related
features of the Printer (e.g. Power Save, Keep Temperature High, or
$
TEST MODE
This function initiates a printout of the parameter settings, Profile definitions,
and PCL typeface list. This printout is helpful for future reference and in
case a Profile need to be changed.
$
RESET PRINTER
If it is necessary to cancel a print job and reset the printer use this function
by setting the value to YES. After resetting the printer changes atomatically
to NO.
Note:
Before starting this function, cancel the print job on the host system!