Maintenance
5-4
5.1.2 Replacing the Waste Toner Bottle
If the Waste Toner Bottler is already filled considerably this is indicated to the
user by the message 15 CHECK TONER BOTTLE on the display.
$
Press first
. OFFLINE will be displayed.
$
Open the front (1) and rear (2) cover.
$
Press the green lever (3) to open the top cover (4), illustrated below.
$
Now remove the old Waste Toner Bottle (5) from its compartment. Close the
filling hole with the cap (6). Take care that the cap fits tightly over the
opening.
$
Take an empty Waste Toner Bottle (5) and put it into the compartment.
Please observe that the cap (6) is placed on the cap holder (7) and not over
the filling hole.
$
Close the top (4), rear (2) and front cover (1).
Note:
Do not expose the light-sensitive OPC to room lighting or sunlight any
longer than necessary. For this reason close the top cover (4) if you are
finished.