WIL-10050-E-02
Wilden
®
10
PERFORMANCE
A1T METAL
RUBBER-FITTED
Height .............................. 224 mm (8.8")
Width ............................... 208 mm (8.2")
Depth ............................... 175 mm (6.9")
Est. Ship Weight .. Aluminum 6 kg (13 lbs)
Stainless Steel 9 kg (20 lbs)
Alloy C 10 kg (22 lbs)
Air Inlet.................................... 6 mm (1/4")
Inlet ..................................... 13 mm (1/2")
Outlet .................................... 13 mm (1/2")
Suction Lift ................... 9.7 m Dry (31.8')
4.5 m Wet (14.7')
Disp. Per Stroke
1
.............. .0.05 l (.013 gal.)
Max. Flow Rate .......... 35.6 lpm (9.4 gpm)
Max. Size Solids ................. 1.6 mm (1/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2 bar (30 psig) head pressure.
Example:
To pump 18.9 lpm (5 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar
(60 psig) and 15.3 Nm
3
/h (9.0 scfm)
air consumption. (See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
A1T METAL
PTFE -FITTED
Height .............................. 224 mm (8.8")
Width ............................... 208 mm (8.2")
Depth ............................... 175 mm (6.9")
Est. Ship Weight .. Aluminum 6 kg (13 lbs)
Stainless Steel 9 kg (20 lbs)
Alloy C 10 kg (22 lbs)
Air Inlet.................................... 6 mm (1/4")
Inlet ..................................... 13 mm (1/2")
Outlet .................................... 13 mm (1/2")
Suction Lift ................... 3.5 m Dry (11.3')
9.3 m Wet (30.6')
Disp. Per Stroke
1
............. .
0.05 l (.014 gal.)
Max. Flow Rate .......... 31.4 lpm (8.3 gpm)
Max. Size Solids ................. 1.6 mm (1/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure against
a 2 bar (30 psig) head pressure.
Example:
To pump 18.9 lpm (5 gpm)
against a discharge pressure head of
1.7 bar (25 psig) requires 4.1 bar (60 psig)
and 16.2 Nm
3
/h (9.5 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Section 5
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.