WIL-10050-E-02
Wilden
®
11
PERFORMANCE
A1P METAL
RUBBER-FITTED
Height .............................. 241 mm (9.5")
Width ............................... 208 mm (8.2")
Depth ............................... 226 mm (8.9")
Est. Ship Weight .. Aluminum 6 kg (13 lbs)
Stainless Steel 9 kg (20 lbs)
Alloy C 10 kg (22 lbs)
Air Inlet.................................... 6 mm (1/4")
Inlet ..................................... 13 mm (1/2")
Outlet .................................... 13 mm (1/2")
Suction Lift ................... 6.6 m Dry (21.6')
9.7 m Wet (31.8')
Disp. Per Stroke
1
...............0.12 l (.031 gal.)
Max. Flow Rate ........ 40.5 lpm (10.7 gpm)
Max. Size Solids ................. 1.6 mm (1/16")
1
Displacement per stroke was calculated
at 4.8 Bar (70 psig) air inlet pressure
against a 2 Bar (30 psig) head pressure.
Example:
To pump 18.9 lpm (5 gpm)
against a discharge pressure head of
2.8 bar (40 psig) requires 4.1 bar
(60 psig) and 10.2 Nm
3
/h (6.0 scfm) air
consumption. (See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
A1P METAL
PTFE-FITTED
Height .............................. 241 mm (9.5")
Width ............................... 208 mm (8.2")
Depth ............................... 226 mm (8.9")
Est. Ship Weight ..Aluminum 6 kg (13 lbs)
Stainless Steel 9 kg (20 lbs)
Alloy C 10 kg (22 lbs)
Air Inlet.................................... 6 mm (1/4")
Inlet ..................................... 13 mm (1/2")
Outlet .................................... 13 mm (1/2")
Suction Lift ................... 5.7 m Dry (18.7')
9.2 m Wet (30.1')
Disp. Per Stroke
1
.............. 0.09 l (.024 gal.)
Max. Flow Rate ........ 42.0 lpm (11.1 gpm)
Max. Size Solids ................. 1.6 mm (1/16")
1
Displacement per stroke was calculated at
4.8 bar (70 psig) air inlet pressure against a
2 bar (30 psig) head pressure.
Example:
To pump 18.9 lpm (5 gpm)
against a discharge pressure head of 2.1
bar (30 psig) requires 4.1 bar (60 psig) and
10.2 Nm
3
/h (6.0 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.