PSC SP400rf, Programming Manual

Page: 48 / 112

42
SP400RF Programming Guide
S
YMBOLOGY
S
ELECTION
S
YMBOLOGY
O
PTIONS
O
VERVIEW
Enable All Symbologies — allows the scanner to auto-discriminate
between all the symbologies in this list. Use this selection only
if you must constantly read a wide variety of symbologies. Turn
to the following pages for enabling additional symbology
specific options.
Disable All Symbologies — disables all symbologies. The scanner
will only recognize the programming labels contained in this
manual while you are in Programming Mode.
Enable UPC/EAN — tells the scanner to recognize UPC-A, UPC-E,
EAN-8, and EAN-13. If you enable this symbology, additional
options for symbology expansion and reading add-ons are
available. Allows selection of expansion and add-on options.
Enable Code 39 — selects Code 39 as an active symbology. Allows
selection of Check Digit, Start/Stop and Single Digit options.
Enable Interleaved 2 of 5 — selects Interleaved 2 of 5 as an active
symbology. Allows change of Check Digit or label format (fixed
or variable length) options.
Enable Standard 2 of 5 — selects Standard 2 of 5 as an active
symbology. Allows change of Check Digit or label format (fixed
or variable length) options.
Enable Codabar — selects Codabar as an active symbology. Allows
selection of Check Digit, Start/Stop character and format, or label
format (fixed or variable length) options.
Enable Code 93 — selects Code 93 as an active symbology. The
scanner is preset to recognize all Code 93 barcodes that have
between 2 and 50 characters. Code 93 has no user selectable
options.
Enable Code 128 — selects Code 128 as an active symbology. The
scanner is preset to recognize all Code 128 barcodes that have
between 2 and 50 characters. Code 128 has no user selectable
options.
Enable MSI/Plessey — selects MSI/Plessey as an active symbology.
Allows selection of Check Digit or label format (fixed or variable
length) options.