PSC SP400rf, Programming Manual

Page: 32 / 112

26
SP400RF Programming Guide
K
EYBOARD
W
EDGE
I
NTERFACE
STI K
EYBOARD
W
EDGE
I
NTERFACE
S
ELECTION
Scan this label to enable the STI Keyboard Wedge interface.
IMPORTANT
When enabling the STI Keyboard Wedge interface, certain parameters
must be set to ensure proper communication with the wedge. Reference
the tables below for these requirements. When all required parameters
have been set for the interface, the entire set of STI Keyboard Wedge
programmable features can be accessed using either the Master
® BB+
Universal Programming Guide
or the
VS/HS Keyboard Wedge Program-
ming Guide (P/N R44-1343) available through your dealer.
Section of this Manual
RS-232 I/F Label Transmit
Format Config
General Features Code 39 Symbology
Baud = 9600 Prefix = None STX = None Symbology = Enable
Parity = Even Suffix = Carriage
Return (0xOD) ETX = None Check Digit Calc =
Don’ t Calculate
Stop Bits = 1 Label ID = None
(except IBMXXXX.
See below) ACK /NAK for
Labels = Disable Check Digit = Don’ t
Send
Data Bits = Seven ACK /NAK for
Commands =
Disable Start/Stop Character =
Don’ t Send
Hardware Control
= None Label ON/OFF File
= Disable Read One Char Label
= Disable
Xon/Xoff =Disable C39 Min Length = 1
C39 Full ASCII =
Disable
IBMXXXX STI W
EDGE
The IBMXXXX STI Wedge has the exception that the Label ID must be
enabled as a Prefix using the standard default value for the symbology to
be used