PSC QuickScan 6000 Programming Manual Download Page 17

Page: 17 / 104

R44-1540

OCIA Options

Use these labels to change the settings as desired. The following brief
descriptions explain each selection.

Beep if Not on File

— when enabled requires the scanner to

beep when a label is scanned that is not on file.

Host Commands

— when enabled allows the scanner to

accept commands directly from the host.

Intercharacter Delay

— refers to a pause, if any, between

each character before being sent to the host. This time delay is
used to control the flow of data from the scanner, but it should
not be required for most applications. When enabled, OCIA
intercharacter delay is set at 70µs.

SET

----------------------------------------------

NABLE

-----------------------------

ISABLE

-----------------------------

NABLE

-----------------------------

ISABLE

-----------------------------

NABLE

-----------------------------

ISABLE

-----------------------------

END

----------------------------------------------

OST

OMMANDS

NTERCHARACTER

ELAY

EEP

ILE

Summary of Contents for QuickScan 6000









































































































Search results

Summary of Contents for QuickScan 6000

Reviews:

Related manuals for QuickScan 6000

Brands by name

Popular brands

PSC QuickScan 6000, Programming Manual

Search results

Summary of Contents for QuickScan 6000

Reviews:

Related manuals for QuickScan 6000

Brands by name

Popular brands