SPECIFICATION OF PV CHARGE CONTROLLER
1.
Safety Instructions
1.1 Safety instructions are identified as follows
WARNING:
This symbol indicates potentially dangerous
condition. Users should pay extreme caution when performing
this task.
CAUTION: This symbol indicates critical procedure for safe
and proper operation of the controller
NOTE: This symbol indicates the procedure or function that is
important for safe and proper operation of the controller.
1.2 Safety Precautions
1.2.1 Read all the instructions and cautions in the manual before
installation.
1.2.2 There are no serviceable parts inside the controller, so do
not disassemble or attempt to repair it without authority
from manufacturer.
1.2.3 Please avoid direct sunlight if you install it outdoor.
1.2.4 Install external fuses/breakers as required.
1.2.5 Install
the controller in well ventilated places, the
controller heatsink may become very hot during
operation.
1.2.6 Keep the controller away from water, electrical heater and
avoid the controller from direct sunlight.
1.2.7 Disconnect PV arrays and battery before install or adjust
the controller.
1.2.8 Power connections must remain tight to avoid excessive
heating from loose connection.
1.2.9 Be sure to always keep children away from the system.
1.2.10 Do not use measurement equipment you know to be
damaged or defective.
1.2.11 Avoid the generation of sparks and wear eye protection
during installation.
1.2.12 The manual must also be available to third parties for all
2
