SPECIFICATION OF PV CHARGE CONTROLLER
4.2.2 Monitoring
At main menu interface, press + or - key, the inverse
cursor moves between main menu 1 and main menu
2, when the inverse cursor points at 1. Monitoring,
then press “Enter” to enter to monitoring interface as
following:
This interface shows the charging
information 4.2.3 Device Set
At main menu 1 interface, let the inverse cursor point to
2.
Device Set and press “Enter” to enter to device
setting interface which displays contents as follow:
Press “Menu” or “Enter”, the inverse cursor moves
among each parameter. When inverse cursor points
at the parameter, the contents of the parameter can be
modified through pr to increase the value or
pressing - to decrease the value. After you done the
setting, keep pressing “Enter” until you enter to
password setting interface as follow:
NOTE: The equipment ID can be set from 1 to 247.
Enter the correct password you will get the next
12
