6.3.7.1 Finetuning the Z adjustment
After finishing the calibration gcode, it is a good idea to print a simple object. The Prusa
gcode from the supplied SD card is a great example. The
Live adjust Z
function works
during every print, so you can finetune at any point. You can see the properly tuned first
layer on the images below.
Pict. 11 The properly tuned first layer
Now you are done!
6.3.7.2 Securing of the probe (kit only)
After couple of prints ideally secure the bottom nut on the probe with a drop of
Loctite 243
(Blue Threadlocker) to prevent loosening over time.
Pict. 12 secure the bottom nut on the probe with a drop of Loctite 243
19
