Installation and Operating Instructions
BDC 102
1328BED001-10B-E
Status 01/07
- 9 -
8 O
P E R AT I O N
/
I
N D I C AT O R S
8.1 Adjustment of control values
Adjustment of maximum storage cylinder temperature TSPmax
This setting determines the maximum temperature that the storage cylinder may reach. This
value is set using the TSPmax adjustment knob such that the arrow points to the required
temperature. Values between 20°C and 95°C are possible.
The low values are intended primarily for operation of swimming pool heating systems.
For hot water storage cylinders, values of between 60°C and 90°C are usual.
A temperature of 80°C is preset at the factory.
8.2 Indicators
The operating status and potential faults are indicated by two lights. For easier identification, a
pump symbol
is shown next to the green LED and a warning symbol
next to the red
LED.
LED
Display colour
Meaning
Green LED
“Mains”
Continuous green
light
Control unit is switched on
Green LED
“Pump”
Flashing green
light
Pump is switched on
Red LED
“Fault”
Continuous red
light
No circulation, although pump is switched
on, or system protection
Red LED
“Fault”
Red flashing light
Error on collector or storage cylinder
sensor
Please observe the specifications laid down by the manufacturer of the storage
cylinder
