Proxxon PS 13, Manual

Page: 9 / 38

- 9 -
Then turn the clamping mechanism (1) 90° to
the right again. The insert is now locked.
Attach suitable sandpaper (self-adhesive), as
shown in fig. 3.
Switch on the device switch and hold the pen
grinder like a ballpoint pen. The grinding move-
ment (the stroke) goes from top to bottom and
vice versa.
Simply remove and replace worn sandpaper.
Applications for your PS 13:
Some typical applications for the PS 13 are
shown in the figures on the fold-out page.
Important:
It is best to work with slight contact pressure,
so that the grind insert can vibrate slightly. This
makes the device as efficient as possible.
Care and maintenance
Apart from occasional cleaning, the device re-
quires no special maintenance. If you observe
the instructions in these operating instructions,
the device will provide you with reliable, safe
and long-lasting quality service.
We reserve the right to make changes in keep-
ing with technical progress.
Disposal:
Please do not dispose of the device in domestic
waste! The device contains valuable substances
that can be recycled. If you have any questions
about this, please contact your local waste
management enterprise or other corresponding
municipal facilities.
EC declaration of conformity
We assume sole liability in declaring that this
product conforms with the following EC guide-
lines:
EG-Machine Guideline 98/037
DIN EN 60745-1 / 12.2003
DIN EN 60745-2-4 / 01.2004
08.05.2006
Jörg Wagner