12
3.9
Safety regulations
The device may only be used in technically perfect condition in the intended use. In the event of defects
or malfunctions, please block the device and contact the manufacturer's service department.
It must be ensured, especially when changing the position of the device without disassembly, that the
safe stand on level ground is guaranteed.
The protective cladding must not be removed. The device may only be operated with the protective
cladding fitted.
The warranty becomes void if modifications are made to the device or electronic devices for control and
measurement are attached that have not been carried out by specialist personnel authorised by the
manufacturer.
Defective parts of the device must be replaced immediately - in this case it is advisable not to continue
using the device until the repair has been carried out. Only original accessories should be used, otherwise
no liability will be accepted.
The device may only be opened by proxomed service or authorized personnel.
Do not place your hands between the moving bearings/rollers.
3.10
Combination with other products
Tergumed® 600 devices are equipped with the smart assist. smart assist is an active medical device from
proxomed Medizintechnik GmbH that contains software. The smart assist was developed and tested
according to EN 60601-1. For the use of the smart assist, the currently valid version of the user manual
of the smart assist (px power) must be consulted.
3.11
Side effects and residual risks
The devices are developed in such a way that no critical side effects can occur. Occasional side effects,
such as muscle soreness and joint pain, can occur, usually after incorrect ergonomic adjustment or after
too intensive training. These symptoms should disappear spontaneously after a few days.
3.12
Incident reporting
Please report any clinical events that occurred during and immediately after use of the device directly to
the manufacturer at the address: [email protected].