page 39
cos105000-2016-00 en
No.
function
Adjustable range (default setting)
OP 01
Reset error messages.
OP 02
Total distance (km)
Report only
OP 03
Total time (h), ope stand-by
Report only
OP 04
Total time (h), operation only
Report only
OP 05
Firmware version
Report only
OP 06
Real time clock
Setting of current date/time
OP 07
Acoustic heart rate signal
OFF or ON
OP 08
Deceleration time
2 ... 30 s (5s)
OP 09
Starting speed (manual and cardio mode)
0.5 km/h ... 5.0 km/h (0.5 km/h)
OP 11
Scaling of profile mode
0 (off)
1 all parameters together
2 each parameter separately
OP 12
Unit for displaying speed
0 = x.x km/h, 1 = x.x m/s, 2 = x.x mph, 3 = x m/min
20 = x.xx km/h, 21 = x.xx m/s, 22 = x.xx mph, 23 = x.x m/min
OP 13
Unit for displaying distance
0: km;1: miles; 2: m
OP 14
Unit for angle of elevation
0 = % / 1 = ° (degrees)
OP 15
Default body weight
10 ... 250 kg (65 kg)
OP 16
Bodyweight request
OFF / ON
OP 17
Unit of energy consumption
JOUL = kJoule, CALO = kcal
OP 18
Max. speed (default) in cardio mode
0.0 ... max. speed (6.0 km/h)
OP19
Setting of polar W:I:N:D system
0000 0000 all senders accepted
xxxx xxxx only specific sender accepted
9999 9999 next sender will be accepted
OP 20
RS 232 interface protocol: COM 1
OFF, 1 … 20 (1 = h/p/cosmos coscom)
OP 21
RS 232 interface protocol: COM 2
OFF, 1 ... 18 (1 = h/p/cosmos coscom)
OP 23
RS 232 interface protocol: COM 4
OFF, 18 … 23 (20 = h/p/cosmos coscom v3)
OP 27
Min. acceleration and deceleration level
1 ... 5
OP 28
Max. acceleration and deceleration level
1 ... 7 (4)
OP 29
Acceleration and deceleration level via RS232
1 ... 5 (4)
OP 40
Locking and unlocking the treadmill
OFF = locked, ON = unlocked
OP 41
Locking and unlocking the manual mode
OFF = locked, ON = unlocked
OP 42
Locking and unlocking the profile mode
0 (all locked) ... 6 (all unlocked)
OP 43
Locking and unlocking the cardio mode
OFF = locked, ON = unlocked
OP 44
Locking and unlocking the test mode
0 ... 94 (28, unlocked up to test 28)
OP 45
Report mode display „index“
0 (display alternates)
1 (MET), 2 (kJ), 3 (Watt)
cannot be stored beyond restart
OP 46
Report mode display „elevation“
0 (display alternates)
1 (elevation), 2 (step)
Cannot be stored beyond restart
OP 47
Sustain values in display resp. automatic „Reset“
OFF = RESET with 1 x STOP
ON= RESET with 2 x STOP
OP 48
Countdown of program-step
OFF = count-up, ON = countdown
OP 52
Output interval for printer protocol
0 = no individual values, 1 ... 100 s (60 s)
OP 53
Language settings for printer protocol
English, German, French, Spanish, Portuguese, Hungarian
Table of User Options (details see chapter 17.4 “User Options (details)”)
