24
Fully mounted units including laser-aiming light meet the safety requirements of Class 2 and are identified
accordingly:
LASER RADIATION
DON'T LOOK INTO THE BEAM
LASER CLASS 2
Do not look directly into the beam when the laser is switched on!
Laser Class 2: safe to the human eye on short exposition due to the
eyelid closing reflex (looking into the beam for up to 0.25 s)
9.1.7 Handling of fibre cables
Minimum allowable bending radii:
Short-term, local:
50 mm
continuous:
120 mm
Avoid permanent movements!
(possibly bend radius >> 200 mm and free from tension forces)
No tension forces! No knots or tight loops! Do not twist! Do not kink!
Do not lead around sharp corners!
Use trays or ducts and guides to maintain minimum bend radii!
Protect the fibre optic connectors with dust caps all times!
No transverse forces
near (< 250 mm) of the fibre optic connectors!
Maximum torque
for the connectors: 0.2 … 0.5 Nm
Lock the fibre cable
before
they connected to the device or to the optical head.
Lock freely mounted fibre cables, especially with vertical mounting every 500 mm!
9.2 Maintenance and care
The device does not need any maintenance.
ATTENTION:
Do not clean the lens with acidic or solvent-based fluids. A slight pollution of the lens or lens
protection can be cleaned by using dry and oil free compressed air. For heavy pollution, please use a soft
and dry tissue.
9.2.1 Packaging and storage
If the original packaging is not available, please use a shock-proof package for shipment of the pyrometer.
For overseas shipment or long term storage in rooms with high humidity the pyrometer should be heat
sealed to protect it against humidity. Please also protect the optics with a protection cover (as delivered) or a
plastic film.
9.2.2 Warranty
PROXITRON GmbH will replace or repair defective parts, which result from design errors or manufacturing
faults, within a period of two years from the date of sale. Special terms can be arranged, in writing, at the
time of purchase of the equipment. Devices, for which the return under guarantee has been approved,
should be sent to PROXITRON GmbH.
The guarantee is invalidated if the device is opened, disassembled, modified, or otherwise destroyed,
without obtaining prior written approval from PROXITRON. The guarantee is also invalidated if the device is
improperly used, or if it is operated or stored under conditions which do not correspond to those defined in
the technical specification.
Summary of Contents for OKS L Q18.194 S10
