Downloaded from Projector.com
1-4
Chapter One
NOTE: If you turn the projector off while the computer is running, the
external monitor will go blank. This is normal. Just turn the projector on
again and the monitor display will return.
Notebooks
NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA
cable adapter to the computer’s Video Out port (or video adapter cable).
1
Plug the COMPUTER end of the VGA Video cable into the notebook’s
VGA Out port or into the Mac - VGA cable adapter (Macintosh only).
2
Plug the end of the VGA Video cable with the large round collar into the
COMPUTER 1 IN port on the projector.
3
Connect your audio source to the COMPUTER 1 AUDIO inputs on the
projector.
4
Turn on the projector and press the
key.
Special Configurations
If your computer has an internal monitor but no external video capability
(such as the Macintosh Performa 575, PowerMac 5200, and certain
PowerBooks), you need a video adapter card in order to attach the DP4100/
4200.
Setup for a third-party adapter is identical to the procedures outlined in the
Quick Start
section above
.
Contact your dealer, Proxima Customer Service, or
a third-party supplier for more information about an appropriate video
adapter.
