Downloaded from Projector.com
3-26
Chapter Three
USING THE AUDIO MENUS
You can incorporate audio into your presentation in a variety of ways. If you
will be using a video source (e.g. Computer), but want to use another audio
source, connect the alternate audio source to the COMPUTER AUDIO IN
port(s).
Selecting Stereo Audio
1
Open the Audio menu.
2
Choose the source (e.g. Video) if microphone is selected.
3
Open the Audio Adjustment menu, and select Fine.
4
Select the Stereo menu and choose Stereo.
5
Adjust balance, treble and bass, if necessary.
6
Press the Menu key to exit and save your changes.
Muting Audio
1
Choose the source (e.g. Computer) you will be using without any audio.
2
Return to the Audio menu and select Source.
3
Select Adjustments, then select Normal.
4
Select Mute, then select ON.
5
Press the Menu key to exit and save your changes.
Simulating Stereo While Using a Monaural Source
1
Connect the monaural source to the left AUDIO or COMPUTER AUDIO
port.
2
Open the Audio menu and select Source.
3
Choose the source (e.g. Video).
4
Select Adjustments, and then select Fine.
5
Select the Stereo menu, and then select Mono.
6
Press the Menu key to exit and save your changes.
When you close the menus, the settings will be saved. In the above example,
the projector will activate simulated stereo audio when you select your
Video source.
