Downloaded from Projector.com
Using the Desktop Projector™ 4100/4200
3-1
Chapter 3
Using the Desktop Projector 4100/4200
TURNING ON THE PROJECTOR AND LAMP
Power the DP4100/4200 up before the computer. This allows the computer
to sense the projector during its startup sequence.
Move the AC POWER switch to the ON position. The
indicator on the
projector control panel turns green and the
key turns orange to
indicate a successful self-test.
The lamp is off when you first turn on the projector. Press the
key on the
operator panel for one second to turn the lamp on. The key blinks for a few
seconds while the lamp warms up, and then turns to a steady green color.
Next, turn on your computer. If you turn the projector off while the rest of
your computer system is running, your external monitor will go blank. This
is normal. Just turn the projector on again and your monitor display will
return.
CAUTION! Never operate the projector if the air intake or exhaust grills
are clogged or obstructed, or if the electric fan is not running.
Source
Setup
Menu
Power Indicator
Power Key
7
Desktop Projector™ 4200
Figure 3-1 Projector power key
