Proxim RANGELAN2 7510, User Manual

Page: 39 / 103

32
Error Domain, which is Domain 13 by default, and the Status LED will blink yellow.
This Domain change will force all RangeLAN2 Stations to lose synchronization to the
Access Point, allowing the Stations to seek out another Access Point still configured to
the appropriate Domain and reestablish network connectivity. This parameter is set to
disabled by default.
Note:
Do NOT enable this parameter if you are using a 10Base2 Ethernet cable to
provide network connectivity to the Access Point. If the 10BaseT Link Monitor
is enabled at any time when a 10BaseT Ethernet connection does not exist, the
Access Point will switch to the Error Domain and will NOT operate as
intended.
Ethernet Port Administrative Status, when disabled, temporarily prohibits the Access
Point from sending or receiving any packets over the Ethernet. This parameter is auto-
matically returned to Enabled when the Access Point is reset. This parameter is primarily
included for customer who intend to manage the Access Point using SNMP. This
parameter corresponds to the SNMP MIB-II Administrative status parameter and can be
used to bring the Ethernet interface back up after it has been disabled by an SNMP
manager.