73
LED Indicators
There are three LEDs on the front of the RangeLAN2 Access Point:
❑
The cornermost LED, called the Status LED, changes from yellow to green to indicate
it is forwarding packets and functional. It changes from yellow to red if there is a
hardware problem with the unit. If this LED does turn red, contact Proxim Techni-
cal Support. The LED will blink yellow if the Access Point has switched to the
Error Domain because the 10BaseT Link Monitor is enabled and cannot detect a
10BaseT Ethernet connection.
❑
The center LED, called the Radio LED, flashes yellow when the Access Point
transmits wirelessly.
❑
The third LED, called the Backbone LED, flashes green when the Access Point
transmits over the Ethernet.
Figure 15
Front Panel LEDs
Status LED
Radio LED
Backbone LED
Summary of Contents for RANGELAN2 7510
