background image

Installation

35

Version 1.0 

| 35 |

LIMITED WARRANTY COVERAGE
PROWINCH products are warranted to the original purchaser for a period of three (3) years after the date 
of purchase only to be free from defects in material and workmanship when subjected to normal, proper 
and intended use. Within this period, PROWINCH will only repair or replace free of charge any part on a 
product, after examination, is determined by PROWINCH to be defective in material or workmanship and 
was not caused or substantially contributed to by other factors or circumstances beyond PROWINCH 
control, including (but not limited to) defective installation, maintenance or repair, product modification 
or alteration, any neglect misuse or excessive use, mishandling, product exposure to extreme or unsuit-
able conditions, normal wear and tear or failure to follow manufacturer’s instructions. This warranty does 
not apply to damage that PROWINCH determines to be from repairs made or attempted by anyone other 
than PROWINCH authorized personnel.
Return of the product with a copy of proof of purchase to PROWINCH, freight prepaid and insured, are 
required for this warranty to be effective. If more than one year has elapsed from purchase date, proof of 
periodic and regular maintenance by an authorized service must also be provided for this warranty to be 
effective. PROWINCH does not cover freight or labor charges associated with the inspection and testing 
of products which are found by PROWINCH not to be a valid warranty claim.

In no event shall PROWINCH be liable for any labor, removal and installation expenses, loss of time, man-
ufacturing costs, transportation, materials, loss of profits, incidental, special, consequential or punitive 
damages, or for any costs, attorney fees, expenses, losses or delays, direct or indirect, alleged to be as 
a consequence of any damage to, failure of, or defect in any product including, but not limited to, any 
claims for loss of profits. PROWINCH disclaims any implied warranties, including without limitation,
any implied warranty of merchantability or fitness for a particular use or purpose.
Acceptance of the exclusive repair and replacement remedies described herein is a condition of the 
contract for the purchase of every PROWINCH product. If you do not agree to this condition, you should 
not purchase the product.

PROWINCH® WARRANTY

DISCLAIMER

Summary of Contents for PWHC1000i

































































Reviews: