![Proware EP-4604D-G1S3 User Manual Download Page 45](http://html1.mh-extra.com/html/proware/ep-4604d-g1s3/ep-4604d-g1s3_user-manual_1620822045.webp)
iSCSI GbE to SAS/SATA RAID Subsystem
User Manual
45
3.3 Disk Drive Installation
This section describes the physical locations of the hard drives supported by the
subsystem and give instructions on installing a hard drive.
NOTE: When the Disk Array is shipped, the disk trays are not
placed in the disk slots. If all disk trays will be used to install all
60 disk drives, for quicker and easier installation of disk drives in
the Disk Array, it is recommended to attach first each disk drive
with HDD side brackets.
DISK SLOT NUMBERS
Rear side
57 53 49 46 43 39 35 31 27 23 19 16 13 9 5 1
58 54 50 B2 A2 40 36 32 28 24 20 B1 A1 10 6 2
59 55 51 47 44 41 37 33 29 25 21 17 14 11 7 3
60 56 52 48 45 42 38 34 30 26 22 18 15 12 8 4
Front Side
Slot 1
Slot 4
Slot 57
Slot 60
A1:
Expander
module
B2:
Expander
module
A2:
Expander
module
B1:
Expander
module
Summary of Contents for EP-4604D-G1S3
Page 1: ...iSCSI GbE to SAS SATA RAID Subsystem User Manual Revision 1 0...
Page 115: ...iSCSI GbE to SAS SATA RAID Subsystem User Manual 115...
Page 174: ...iSCSI GbE to SAS SATA RAID Subsystem 174 User Manual 8 Install 9 Installation succeeded...
Page 184: ...iSCSI GbE to SAS SATA RAID Subsystem 184 User Manual 34 Done...