Proware EP-4604D-G1S3, User Manual

Page: 107 / 185

iSCSI GbE to SAS/SATA RAID Subsystem
User Manual 107
Two VDs, “VD-R5-1” and “VD-R5-2”, were created from RG “RG-R5”. The size of “VD-
R5-1” is 50GB, and the size of “VD-R5-2” is 64GB. There is no LUN attached.
Step 3: Attach LUN to VD.
There are 2 methods to attach LUN to VD.
1. In “/ Volume configuration / Virtual disk”, move the mouse pointer to the
gray button next to the VD number; click “Attach LUN”.
2. In “/ Volume configuration / Logical unit”, click “Attach”.
The steps are as follows:
1. Select a VD.
2. Input “Host” name, which is a FC node name for access control, or fill-in
wildcard “*”, which means every host can access to this volume. Choose LUN
and permission, and then click “OK”.
3. Done.
VD-R5-1 is attached to LUN 0. VD-R5-2 is attached LUN 1.
NOTE: The matching rules of access control are from the LUNs’
created time, the earlier created LUN is prior to the matching rules.