Cutting pad
Embossing Folder
Paper
Cutting pad
Spacer
TIP
Embossing Folders
Cutting Dies
Cutting pad
Paper
Cutting Die
Cutting pad
Spacer
TIP
• For best results, experiment with scrap paper first.
1.
Position materials as shown,
with cutting die foam side up.
2.
Move materials through Cuttlebug
machine by turning handle.
3.
Remove all material from die;
discard unwanted pieces.
1.
Position paper face up inside
embossing folder.
2.
Place embossing folder and
paper between cutting pads.
3.
Insert into Cuttlebug machine
and turn handle.
Fig 4
Fig 5
• For best results, experiment with scrap paper first.
