Instructions for Stone Cutting Machine
For your own safety,
read all instructions carefully
Before
using this machine
3HP
2800rpm
IP55
(300x25.4)
350x25.4
L=600
B=85(165)
500x510
0°or 45°
600lt/h
L=1145
B=695
H=500
77/97
3HP
2800rpm
IP55
(300x25.4)
350x25.4
L=800
B=85(175)
1050x580
0°-45°
600lt/h
L=1270
B=786
H=735
112/142
+3
+3
2800rpm
IP55
L=1000
%
1250x580
0°-45°
600lt/h
L=1470
B=786
H=735
127/157
2800rpm
IP55
(300x25.4)
350x25.4
(300x25.4)
350x25.4
L=1200
%
1450x580
0°-45°
600lt/h
L=1670
B=786
H=735
137/172
Kg.
Technical data
Please Read First
WARNING!
When using electric tools basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and personal injury including the
following.
Read these instructions before attempting to operate
this product and save these instructions.
If you notice transport damage while unpacking, notify
your supplier immediately. Do not operate the saw!
Dispose of the packing in an environmentally friendly
manner. Take to a proper collecting point.
Keep these instructions for reference on any issues
you may be uncertain about.
General safety instructions
1. Keep work area clear
- Cluttered areas invite injuries.
2. Consider work area environment
- Do not expose tools rain.
- Do not use tools in damp or wet locations.
- Keep work area well lit.
- Do not use tools in the presence of flammable liquids
of gases.
3. Guard against electric shock
- Avoid body contact with earthed or grounded
surfaces. (e.g. pipes, radiators, ranges,
refrigerators).
4. Keep other persons away,
- Do not let persons, especially children, not involved
in the work touch the tool or the extension cord and
keep them away from the work area.
5. Store idle tools
- When not in use, tools should be stored in a dry
locked up place. Out of reach of children.
6. Do not force the tool
- It will do the job better and safer at the rate for
when it was intended.
7. Use the right tool
- Do not force small tools to do the job of a heavy duty
tool.
- Do not use tools for purposes not intended.
8. Dress properly
- Do not wear loose clothing or jewellery, they can be
caught in moving parts.
- Non-skid footwear is recommended.
- Wear protective hair covering to contain long hair.
9. Use protective equipment
- Use safety glasses.
- Use face or dust mask if working operations create
dust.
10. Do not abuse the cord
- Never yank the cord to disconnect it from the socket.
Keep the cord away from heat, oil and sharp edges.
11. Do not overreach
- Keep proper footing and balance at all times.
12. Maintain tools with care
- Keep cutting tools sharp and clean for better and
safer performance.
- Follow instructions for lubricating and changing
accessories.
- Inspect tool cords periodically and if damaged have
them repaired by an authorized service facility.
- Inspect extension cords periodically and replace if
damaged.
- Keep handles dry, clean and free from oil and grease.
13. Disconnect tools
- When not in use, before servicing and when changing
-1-
SJ23060
SJ23080
SJ23100
SJ23120
