ENGLISH
19
18 ENGLISH
TIP: Even with the Center Point function activated, a character will still cut proportion-
ate to the Key Height Character unless Real Dial Size is selected. For example, a lower-
case letter may not cut exactly centered over the center point because it is being cut
proportionate to the Key Height Character. Press Real Dial Size for a centered cut.
TIP: To turn off modes and functions, simply press the specific mode or function button
again until the button is no longer backlit in green.
Settings
The Settings screen allows you to change the language, units of measurement, Multi
Cut settings, mat size, and character image display. The Settings screen determines
the machine’s settings that will be the default each time the machine is used. To ac-
cess the Settings screen, press the Settings button until it is backlit in green and the
display shows the first Settings menu. There are five Settings menus:
1. The language menu allows you to choose one of four languages (English, French,
Spanish, or German) to be used for the instructions and information on the display screen.
2. The units menu allows you to choose one of four units of measurement (Inches—
1/4ths, Inches—1/10ths, cm, or mm).
3. The Multi Cut menu allows you to choose the numbers of cuts (2, 3, or 4) to be used
for the Multi Cut mode.
4. The default mat size menu allows you to choose the mat size (12” x 12” or 12” x 24” )
you will be cutting with.
5. The character images menu allows you to choose to show previewed cuts on the
display (Display) or to not show previewed cuts on the display (Don’t Display).
The Left and Right Arrow Buttons can be used to move through the different selections,
and the OK button is used to make selections. Press the OK button to advance to the
next menu and press the SETTINGS button to exit.
The Line Return function allows you to create
line breaks between cuts as if you were using
the return or enter key on a computer key-
board. Select the first line of characters, press
CUT, select more characters, press the Line
Return button, and then press CUT again.
The Flip function creates a flipped (or mirrored)
image cut of characters. To use the Flip
function, press the Flip button until it is backlit
in green. Then make your character selection,
press CUT, and the machine will cut a flipped
version of the selection on the display. The
Flip function can also be used with the Mix ’n
Match mode.
Xtra1
Mat
Size
Settings
Xtra2
Downloaded from
www.Manualslib.com
manuals search engine
