18 ENGLISH
TIP: After making your cutting selection, press the OK button to see the calculated
number of cuts that will fit on the page.
TIP: After making your cutting selection, press the OK button to see the calculated
height of the cut.
TIP: The Auto Fill mode will only allow up to 300 duplicates of the selected character(s).
If you would like to cut more than 300, you can select two (or more) of the same
character(s) and then press the Auto Fill button. This would increase the duplicates to
600 (or more).
TIP: Certain modes can be combined, such as Portrait, Mix ’n Match, and Quantity.
However, the size modes (Fit to Page, Fit to Length, and Auto Fill) cannot be combined.
For example, if you select Fit to Page and then select Auto Fill, the Cricut Expression
will automatically deselect Fit to Page and select Auto Fill.
Functions on the Cricut Expression
®
machine
The Auto Fill mode fills the page with as many
of the characters selected on the display as will
fit on the page at the size selected. To use the
Auto Fill mode, press the Auto Fill button so that
the button is backlit in green. Then make your
character(s) selection, set the Size Dial, and
press CUT.
The Multi Cut function allows you to cut the cut
lines of a selected character(s) two, three, or
four times on top of the original cut lines. This
allows the machine to cut thicker materials,
such as thin chipboard. To use the Multi Cut
function, you must first determine the number
of multi cuts in the Settings screen. Press the
Settings button and advance through the set-
tings options until you reach the Multi Cut menu.
Use the plus and minus arrows to select 2, 3, or
4 and then press OK to select. Exit the Settings
screen and then press the Multi Cut button until
it is backlit in green. Then make your character
selection(s), press CUT, and the machine will use
your Multi Cut setting to cut the character(s).
The Center Point function cuts a character(s)
centered on a designated point. It is only available
in the Landscape mode. This function is useful for
cutting shapes around images on photographs or
patterned paper. To use the Center Point function,
move the cutting blade using the Blade Naviga-
tion Buttons until the blade is over the center of
the cut. Press the Center Point button until it is
backlit in green. Then make your character
selection(s), press CUT, and the machine will cut
the character with the blade position you set as
the center of the cut.
Multi
Cut
Center
Point
Flip
Line
Return
Downloaded from
www.Manualslib.com
manuals search engine
