ProVisual 16 series, User Manual

Page: 77 / 138

77

Save Option: allow user to select Drive(C, D) and folder to save data.

Choose ‘OK’ to confirm the setting.
8.2.2 Remote Site

This menu is for Network setup.

Make CMS IP address and Port coincide with DVR.

Remote Site Connection Setup
-
Site Name: input DVR site name to be displayed on the right-hand side of DVR icon. Please note that this name has
nothing to do with the ID registered in DVR. User may create a name that is fairly easy to distinguish.
-
IP Address/Domain Name: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in DVR).
-
Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR).
-
Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR).
-
Re-connect when abnormal disconnected: When the CMS has abnormally disconnected, it automatically verifies the
network condition, then tries reconnecting to designated site.

Scan DVR
-
This function automatically detects and registers units currently connected to local networks.
-
Click “Scan DVR”, then following will pop up.