ProVisual 16 series User Manual Download Page 66

Page: 66 / 138

⑥

Click ▲

▼

button for selecting cameras.

⑦

Selected camera will show the time bar 0-60 and it will be marked on 2.5minutes basis during selected time zone.

⑧

Click (



) the box on the time indication bar to select the start time of the video playback



Click (



) Search key to start playing back the selected video.



Playback continues from the designated time until the last recording time.

(NOTE)

Click (



)

search button to show entire channel search based on different time frames

5.2.3 Event Search



Please click (



) Event Search in SEARCH menu and the following input box will appear.



This involves searching recorded video to playback

the selected video of a specific date and time.



Press

SEARCH

key on the viewing screen, or use the mouse wheel (central button) and the following Search menu will

appear.

①

Designate Event Search start time.

②

Designate Event Search end time.

③

Select camera (video) to search data.

④

Check a check box (Motion / Alarm In / Emergency / Serial In) Check box.

⑤

Click on Search Index button to recorded search event data.

5.3 Playback



This involves searching recorded video to playback the wanted video of a specific date and time in search mode.



Press

SETUP

key or please press the mouse right button and click in Playback mode. Then, the following screen will appear.



There are three ways to search video, i.e., by date/time and by calendar.

Date/Time Search: search by inputting date/time.

Calendar Search: search by using calendar.

Event Search: search by event.



There are three other functions in playback mode;

Archive: The Archive function will allow user to copy the recorded video (moving images and still images) from a storage

Summary of Contents for 16 series











































































































































Search results

Summary of Contents for 16 series

Reviews:

Related manuals for 16 series

Brands by name

Popular brands

ProVisual 16 series, User Manual

Search results

Summary of Contents for 16 series

Reviews:

Related manuals for 16 series

Brands by name

Popular brands